Better Polish

Posted by: W9JAB

Better Polish - 04/14/18 09:03 AM

My Code Black ball, seemed to be rolling out and hooking too soon, The surface had been roughed up, so I had it polished to about a 1000 grit, but still not were I needed it to be.
I then used Automotive "clay" to polished up a little more, then soaked it in hot water with "Dawn dish soap" and it worked great.
Just thought I pass it along.
Posted by: 6_ball_man

Re: Better Polish - 04/22/18 04:00 PM

Originally Posted By: W9JAB
My Code Black ball, seemed to be rolling out and hooking too soon, The surface had been roughed up, so I had it polished to about a 1000 grit, but still not were I needed it to be.
I then used Automotive "clay" to polished up a little more, then soaked it in hot water with "Dawn dish soap" and it worked great.
Just thought I pass it along.


Is the "clay" stuff rubbing compound? I have used that in the past but haven't lately...
Posted by: BOSStull

Re: Better Polish - 04/24/18 12:24 PM

I may have to give Clay a try. I read that there are different grades of clay rated from fine, medium, and heavy. W9JAB what did you use and what was the process? Use a spinner or hand?