Please help sustain BowlingCommunity.com by using the following links to Amazon.com before making purchases. It won't cost you anything more but we'll receive a small commission which will help defray our expenses. Thank you for your help!
There's more to refinishing a ball then having a spinner. You need the abralon pads (expensive) and polishes etc...... The abralon pads do not last more then a few times of use before they are significantly less "gritty". If you get one, you'll need to find out how to use it properly.
Our shop charges $5 for touch ups and minor finishes. We rarely have the full $25 resurface come in.
#68088 - 10/03/0810:57 AMRe: Good bowling ball for me?
[Re: Atochabsh]
General Pounder
Legend
Registered: 03/28/06
Posts: 2696
A/S/L: 33/M/Tinley Park, IL
Originally Posted By: Atochabsh
There's more to refinishing a ball then having a spinner. You need the abralon pads (expensive) and polishes etc...... The abralon pads do not last more then a few times of use before they are significantly less "gritty". If you get one, you'll need to find out how to use it properly.
Our shop charges $5 for touch ups and minor finishes. We rarely have the full $25 resurface come in.
#68100 - 10/03/0804:20 PMRe: Good bowling ball for me?
[Re: Justinmill14]
General Pounder
Legend
Registered: 03/28/06
Posts: 2696
A/S/L: 33/M/Tinley Park, IL
Full resurfacing is taking multiple grits of pads to a ball starting with a real low grit like 320 and workinig your way up to 2000 (this is to get all of the deep scratches out). Touch-ups are using the last pad on them only. At least, that is my interpretation.
Well a touch up is what ever the last grit used on the ball to give it it's current surface. This can include the last grit and polish. If a ball is at 4000, then a quick go all the way around the ball with it and polish is the touch up. If its 4000 then polish just hitting it with the polish all the way around is the touch up. If the ball is at 500 grit its just using that on it.
The resurface would be starting low, like around 180 grit to get a good cut into the surface and then working your way up to the desired surface. This takes a lot more time and is only needed if you have huge scratches and a very worn Track.
_________________________
Calvin's Highs Career HG:300 HS:763
#68161 - 10/05/0811:27 AMRe: Good bowling ball for me?
[Re: Calvin Pistorio]
General Pounder
Legend
Registered: 03/28/06
Posts: 2696
A/S/L: 33/M/Tinley Park, IL
Cal:
There is a miniumum.
Originally Posted By: topendsports.com
The circumference of a ball shall not be more than 27.002 inches nor less than 26.704 inches, nor shall it weigh more than 16 lbs (there is no minimum weight).
#68163 - 10/05/0812:02 PMRe: Good bowling ball for me?
[Re: General Pounder]
Dennis Michael
Legend
Registered: 12/11/05
Posts: 6119
A/S/L: M/Barrington, Ill
Yep, there is a minimum. It started with the advent of automatic pin setting machines. Lighter weight balls were smaller in diameter. That was the only way ball manufacturers were able to reduce the weight. That wasn't a problem with pinboys. But, when the auto machines came into being, the balls had to be a certain diameter for the machines to move it properly. Min and Max sizes became the standard.
_________________________
Legends - Dynamic Power 16# Med/Heavy arc Legends - Terminator 16# Heavy length Legends - BigRBang 16# Medium Length Legends - Black Diamond 16# Heavy Length, ready to step in. Legends-L/M Xtreme Damage in my future
Previous Topic
Index
