In Joe Slowinski’s
book, “Bowler Reference System”, he says that with just a 10 minute commitment each day, this drill will help you by improving your timing as well as freeing up your swing. In this drill, you will take the first two steps of a full approach. But, the ball will swing twice. After the first swing, you will pause, then pushaway and let the ball swing freely again. The beauty of this drill is that it can be done at home, or on the lanes.
Set-up in the stance and step one:
He recommends placing the non-slide
shoe one inch (2.5cm) in front of the slide
shoe. Place the ball in front of the shoulder with your elbow at your side. This will form a 90 degree angle between the shoulder, elbow and hand. The hand should be directly under the ball with the non ball side hand under the ball for support.
After setting-up, take one natural step with the slide foot without moving the ball. He advocates not sliding the slide foot on the first step. Bowling has many different approach surfaces. Each has a different amount of friction. So the length can be changed due to friction. Rather, a natural first step is the best practice for consistency.
Think step – push. Step – push – relax. Before you start, say to yourself, “My swing is free, smooth and light.”
Joe Slowinski, has written one of the best
books for teaching the modern game of bowling, this is just one of the many helpful drills and tips.
You can buy it here: http://www.bowlingsbookstore.com/catbkins2.html?mgiToken=469E7616681CF178#Bowler%20Reference%20System