BowlingFans.com, The site for the fans, by the fans....
Sponsored Links




ChatBox:

Sponsored Links


Topic Options
Rate This Topic
#68426 - 10/09/08 09:33 AM Re: Ball legality question [Re: Tim Gerard]
cgeorg Offline


Registered: 10/12/07
Posts: 3567
A/S/L: Pittsburgh, Pa
Originally Posted By: USBC Rules
Holes:
The following limitations shall govern the drilling of
holes in the ball:
1. Holes or indentations, not to exceed five (5), for
gripping purposes. The player is not required to use
all the holes in any specific delivery, but they must
be able to demonstrate that each hole can reasonably
be used for gripping purposes. Any hole that
cannot be reasonably shown to be used with a single
hand would be classified as a balance hole.
2. One hole for balance purposes not to exceed 1-1/4
inch diameter. (Including the surface opening).
3. No more than one vent hole to each finger and/or
thumb hole not to exceed 1/4 inch in diameter (including
the surface opening). This hole may not exceed
1-1/4 inch at any point through the depth of
the hole.
4. One mill hole for inspection purposes not to exceed
5/8 inch in diameter and 1/8 inch in depth.
Balance:
The following tolerances shall be permissible in the balance
of a bowling ball used in certified competition:
1. 10.01 pounds or more:
a. Not more than 3 ounces difference between top
half of the ball (finger hole side) and the bottom
half (side opposite the finger holes).
b. Not more than 1 ounce difference between the
sides to the right and left of the finger holes or
between the sides in front and back of the finger
holes.
c. Aball drilled without a thumb hole may not have
more than 1 ounce difference between any two
halves of the ball.
d. A ball drilled without any finger holes or indentations,
may not have more than 1 ounce difference
between any two halves of the ball.
e. A ball used without any hole or indentations
may not have more than 1 ounce difference between
any two halves of the ball.
f. Any ball used with a two-handed delivery with
or without holes or indentations may not have
more than 1 ounce difference between any
two halves of the ball.
2. For a ball weighing 10.0 pounds to 8.0 pounds:
a. Not more than 2 ounces difference between top
half of the ball (finger hole side) and the bottom
half (side opposite the finger holes).
b. Not more than 3/4 ounce difference between the
sides to the right and left of the finger holes or
between the sides in front and back of the finger
holes.
c. A ball drilled without a thumb hole may not
have more than 3/4 ounce difference between
any two halves of the ball.
d. A ball drilled without any finger holes or indentations,
may not have more than 3/4 ounce difference
between any two halves of the ball.
e. A ball used without any hole or indentations
may not have more than 3/4 ounce difference
between any two halves of the ball.
f. Any ball used with a two-handed delivery with
or without holes or indentations may not have
more than 3/4 ounce difference between any
two halves of the ball.
3. Less than 8.0 pounds:
a. Not more than 3/4 ounce difference between the
top half of the ball (finger hole side) and the bottom
half (side opposite the finger holes).
b. Not more than 3/4 ounce difference between the
sides to the right and left of the finger holes or
between the sides in front and back of the finger
holes.
c. A ball drilled without a thumb hole may not
have more than 3/4 ounce difference between
any two halves of the ball.
d. A ball drilled without any finger holes or indentations,
may not have more than 3/4 ounce difference
between any two halves of the ball.
e. A ball used without any hole or indentations
may not have more than 3/4 ounce difference
between any two halves of the ball.
f. Any ball used with a two-handed delivery with
or without holes or indentations may not have
more than 3/4 ounce difference between any
two halves of the ball.


Extracted from rule 1:

Quote:
The player is not required to use
all the holes in any specific delivery, but they must
be able to demonstrate that each hole can reasonably
be used for gripping purposes.


As long as he can demonstrate it could be used, he's fine.
_________________________
CMGBB - Bowling tips
BowlSK - Bowling score keeper and stats tracker
My BowlSK

That my boy... that's pro quality.

Top
#10100 - 1 second ago Sponsored Links
Sponsored Links Online   content
Legend

Registered: Fri Aug 27 2004
Posts: 10100
A/S/L: Mountain View, CA
Top



Entire topic
Subject Posted by Posted
Ball legality question Tim Gerard 10/09/08 09:22 AM
Re: Ball legality question cgeorg 10/09/08 09:33 AM
Re: Ball legality question Dennis Michael 10/09/08 09:37 AM
Re: Ball legality question Tim Gerard 10/09/08 09:59 AM
Re: Ball legality question cgeorg 10/09/08 10:04 AM
Re: Ball legality question Tim Gerard 10/09/08 11:02 AM
Re: Ball legality question Mattdean76 02/24/09 01:15 AM
Re: Ball legality question Dennis Michael 02/24/09 05:24 AM

Moderator:  Angel, Community Manager 
Savings That Support BowlingCommunity.com
We need your help!
Rather than begging for donations we're asking you to do one simple thing to help keep these forums running smooth:
When shopping for anything on Amazon.com or eBay please use these links to go to the web sites.

This won't cost you a cent!
You'll still get the exact same low prices, deals and free or low cost shipping; it doesn't change anything for you at all! The items do not have to be bowling related; all purchases made through these links help us! Amazon.com and eBay will pay us a small commission for every sale and it's helping us cover the expenses.

BowlingCommunity.com Recent Posts
Bowler turns 100
by Dennis Michael - 11/19/19 05:04 PM
Our Bowling Ally is now Chuckie Cheese
by djp1080 - 11/18/19 07:59 PM
Major News in the Industry
by Mkirchie - 11/17/19 04:35 PM
Good morning everyone...
by djp1080 - 11/17/19 12:50 PM
Plastic or Urethane?
by Dennis Michael - 11/17/19 12:45 PM
What is the best ball to get?
by djp1080 - 11/10/19 09:02 PM
Which fork on the Hy-Road should I take?
by Mkirchie - 11/02/19 07:05 AM
End of Days
by BOSStull - 11/02/19 06:44 AM
Terms Of Use
Use of this community signifies your agreement to the Community Standards and Conditions of Use.

About BowlingFans.com | Contact Us | Advertise With Us | Site Map
Use of this website constitutes acceptance of our Terms of Use and Privacy Policy. | Material Connection Disclosure

Copyright © 1998 - 2019 - usrbingeek LLC | Copyright Policy
BowlingFans.com, BowlingFans, The Right Approach, Kegler's Connection, Tour411, BallBeat, BowlingCommunity.com, BowlSearch.com, and Bowling News You Can Use are trademarks of usrbingeek LLC. All other trademarks and tradenames are property of their respective owners.